Aquaprufe APF-C, With sand

PRODUCT DESCRIPTION

Aquaprufe APF-C pre-applied, fully bonded HDPE membrane consists of
multi-layer composite waterproofing material for superior waterproofing performance, including a layer of thick HDPE film, self-adhesive polymer layer and a unique particulate layer.
Aquaprufe APF-C pre-applied waterproofing membrane can be installed on uniform and regular concrete blinding, compacted sand-stone cushion for waterproofing of below ground surfaces and is also used for waterproofing of confined surfaces or blind side waterproofing.
Aquaprufe APF-C waterproofing membrane is designed to bond fully and permanently with poured concrete against it after placing and tying reinforcement.

WHERE TO USE

Description

PRODUCT STRUCTURE

PRODUCT FEATURES

Forms permanent bond to concrete poured against it, preventing water from seeping into the gap between waterproofing membrane and the structure
Not affected by the displacement of the basal layer/ ground settlement beneath slabs
Membrane is self-protecting. It can be trafficked immediately after application and does
not require the use of protective layer
Simple and quick to install, requiring no priming or fillets
Unaffected by wet conditions
Fully-adhered watertight laps and detailing
Excellent bonding even under long-term water immersion

SPECIFICATION

Product name	Length	HDPE thickness	Membrane thickness	width
AQUAPRUFE APF-C PRE-APPLIED, FULLY BONDED HDPE WATERPROOF MEMBRANE (WITH SAND)	1m/2m	0.8mm	1.2mm	1.0mm
	1m/2m	1.0mm	3.5mm	1.0mm


Sealed Tape	Sealant

DATABASE

Property	Typical Value	Test method
Colour	White
Thickness	1.2mm	ASTM D 3767
Tensile Strength, One Direction, Film	≥25 Mpa	ASTM D 412 Modified
Tensile Strength, Other Direction, Film	≥21 Mpa
Elongation	≥400%	ASTM D 412 Modified
Low Temperature Flexibility -25ºC,	Pass	ASTM D 1970
Water Migration/Resistance to Hydrostatic Head	＞70M	ASTM D 5385 Modified
Crack Cycling	Pass	ASTM D 836 / ASTM C 1305 Modified
Peel Adhesion to Concrete, No Treatment	≥880 N/m	ASTM D 903 Modified
Dimension Stability	＜ 2%	ASTM D 1204
Puncture Resistance	≥1000 N	ASTM E 154